Schraubenberechnung

Durch jahrzehntelanger Erfahrung im Bereich der Ventiltechnik konnten unsere Ingenieure Expertise in den Bereichen Schraubverbindungen und Dichtheit aneignen. Unser Fokus liegt dabei in der Berechnung, Auslegung und Simulation der Herausforderung. Dafür stehen uns modernste Softwaretools zur Verfügung.

Bolts & Joints

  • Analysis of tightening curves (tightening and loosening curves)
  • Analytical determination of tightening parameters and bolting curves - also with the help of FEM
  • Dynamic determination of bolt force
  • Settling force determination from measurements, by loosening or further turning
  • Selection of an optimum tightening method (torque, angle, yield strength)
Schraubverbindung - Flansch

Sealing engineering

FEM Analyse - Kante

FEM analysis of a steel sealing edge

  • Specialized in "hard" seals
  • Design of a sealing point without sealing element
  • Determination of the required sealing force
  • Calculation and analysis of pressure distributions in the sealing area
  • Determination of a critical leakage path
  • Analysis of the sealing
  • Determination of the leak tightness limit under specified general conditions
  • Optimization of the sealing geometry
  • Determination of the tightness pressure

We offer qualified, individual and free consulting during the entire project including detailed explanation and interpretation of the results. Because we care about your success, we always go one step further and sometimes solve problems you didn't even know existed.